Structure,electrical and dielectric properties of Ca substituted BaTiO3 ceramics

BaTi_1-xCa_xO_3-x [BTC100x] ceramics were synthesized via solid-state reaction method. Effect of Ca substitution on the structure, electrical and dielectric properties of BTC100x ceramics was systematically investigated. Calcined BTC100x powders were in tetragonal phase when x?≤?0.01, whereas transformed to cubic at x?>?0.01. Additionally, the diffraction peak (200) shifted to lower angles with increasing x, indicating increased unit cell volume. Meanwhile, Ba_0.97Ca_0.03TiO₃ [BC3T] ceramic was prepared and studied, to compare with BaTi_0.97Ca_0.03O_2.97 (BTC3). It was found that pure BaTiO₃ [BT] and BC3T ceramics had the similar structural and dielectric properties, whereas BTC3 ceramic showed much difference，XRD patterns, Raman spectrum, impedance spectra and dielectric-temperature spectra provided strong evidence of Ca²⁺ substitution at Ti site in BT lattice. Finally, BTC100x ceramics were produced and dielectric properties were investigated. With increasing x, the Curie temperature decreased from 128?°C (BT) to 42?°C (BTC5).     

Structural,magnetic and magnetostrictive properties of Co1-xLixFe2O4 synthesized by cathode materials of spent Li-ion batteries

In this study, we investigated the effects of substituting Li⁺ for Co²⁺ at the B sites of the spinel lattice on the structural, magnetic and magnetostrictive properties of cobalt ferrites. The Li⁺ substituted cobalt ferrites, Co_1-xLi_xFe₂O₄, with x varying from 0 to 0.7 in 0.1 increments, were synthesized with a sol-gel auto-combustion method using the cathode materials of spent Li-ion batteries. X-ray diffraction analysis revealed that all the Co_1-xLi_xFe₂O₄ nanopowders had a single-phase spinel structure and the lattice parameters decreased with increasing Li⁺ content, which can be proved by slight shifts towards higher diffraction angle values of the (311) peak. Field emission scanning electron microscopy was used to observe the fractured inner surface of the sintered cylindrical rods and the increased porosity resulted in a decreased magnetostriction. The oxidation states of Co and Fe in the cobalt ferrite samples were examined by X-ray photoelectron spectroscopy. High resolution transmission electron microscopy micrographs showed that most particles were roughly spherical and with sizes of 25–35?nm. Li⁺ substitution had a strong effect on the saturation magnetization and coercivity, which were characterized with a vibrating sample magnetometer. The Curie temperature was reduced due to the decrease in magnetic cations and the weakening of the exchange interactions. The magnetostrictive properties were influenced by the incorporation of Li⁺ at the B sites of the spinel structure and correlated with the changes in porosity, magnetocrystalline anisotropy and the cation distribution.     

Compensation for volatile elements to modify the microstructure and energy storage performance of (W,Ni)-codoped Na0.5Bi0.5TiO3 ceramic films

This work reports the characteristics of nonstoichiometric Na_0.5+xBi_0.5+yTi_0.96W_0.01Ni_0.03O₃ (x?=?0.0%, y?=?1.0%; x?=?0.5%, y?=?2.0%; x?=?1.0%, y?=?4.0%) ceramic films derived from chemical solution deposition and the role played by excess Na/Bi in modifying microstructure and electrical properties. Single perovskite phase structure can be maintained in all compositions. Decreased grain size can be obtained with the increasing compensation for volatile Na/Bi elements. Particularly, extra amounts of 0.5?mol% Na and 2.0?mol% Bi leads to reduced leakage and enhanced ferroelectric polarization. Meanwhile, due to the high breakdown electrical field strength and large difference between maximum and remanent polarization, an excellent energy storage performance can be achieved in Na_0.505Bi_0.52Ti_0.96W_0.01Ni_0.03O₃ sample, which is distinguished by a recoverable energy storage density of 40.5?J/cm³ and an energy storage efficiency of 43.6% at 2515?kV/cm as well as a good frequency stability. Hence, the regulation for the content of volatile elements is effective to modify the electrical response of Na_0.5Bi_0.5TiO₃-based materials.     

Effect of donor W and acceptor Ni codoping at Ti site on the structure and electrical properties of Na0.5Bi0.5TiO3 thin film

Pure Na_0.5Bi_0.5TiO₃ (NBT), donor W⁶⁺ doped NBT (NBTW), acceptor Ni²⁺ doped NBT (NBTNi), as well as donor W⁶⁺ and acceptor Ni²⁺ codoped NBT (NBTWNi) polycrystalline films are fabricated on indium tin oxide (ITO)/glass substrates via a chemical solution deposition method. The roles of aliovalent-ion substitution on the crystallinity, ferroelectric and dielectric properties of NBT film are mainly investigated. With the introduction of aliovalent-ion, the surface of the doped film becomes more uniform and the leakage current is reduced. Well saturated polarization-electric field (P-E) loops can be observed in W⁶⁺ and Ni²⁺ codoped NBT film due to its lowest leakage currents compared to those of other films. Also, the effect of voltage and frequency on the capacitance-voltage (C-V) curve and the dielectric tunability for the NBTWNi film is discussed. The ferroelectric and dielectric properties are largely improved in NBTWNi film, which can be ascribed to the synergetic effect of high-valence W⁶⁺ and low-valence Ni²⁺ ions. The cooperation between the acceptor and donor cations can effectively eliminate the mobile oxygen vacancies in NBT films.     

中美欧筒仓规范下仓壁的分析设计*

本文从理论依据、侧压比、计算基本参数及进卸料偏心等因素采用的放大系数等方面对中美欧筒仓规范中浅仓的贮料压力计算公式进行了研究。并结合某工程25m直径的钢筋混凝土熟料库，在不同的高径比的情况下，对三本规范计算所得的仓底压力、仓壁水平压力及仓壁摩擦力的变化趋势做了对比。探讨了季节温差与内外温差对仓壁内力的影响，结果表明内外温差会对仓壁产生较大的环向与竖向弯矩，在实际分析设计中应予以充分重视。     

Preparation of biaxially textured Ce1-x(Y0.2Zr0.8)xOδ buffer layers on RABiTS NiW tapes by chemical solution deposition

Highly (100)-oriented Ce_1-x(Y_0.2Zr_0.8)_xO_δ (CYZO) films were prepared on biaxially textured NiW substrates by a chemical solution deposition approach using metal inorganic salts as starting materials. It has been found that both the preferential orientation and surface roughness of CYZO films decrease gradually with increasing of the doping percentage of Y³⁺ and Zr⁴⁺ ions. The epitaxial growth relationship of (220)_CYZO//(200)_NiW and [00?l]_CYZO//[001]_NiW was demonstrated by XRD texture measurement as well as atomic resolution STEM observation. XRD, Raman and XPS spectra results indicate that Y³⁺ and Zr⁴⁺ ions were indeed introduced into CeO₂ lattice to substitute Ce⁴⁺ ions and form cubic fluorite CYZO solid solution. Moreover, CeO₂ buffer layer can be endowed a strong enough capability to prevent element diffusion through co-doping of yttrium and zirconium, provided that an optimal doping ratio of them is adopted. This will provide a new approach to fabricating strong-barrier single buffer layer for coated conductor.     

Effect of sintering temperature on electrical properties of SiC/ZrB2 ceramics

SiC/20?wt% ZrB₂ composite ceramics were fabricated via pressureless solid phase sintering in argon atmosphere at different temperature. The effect of sintering temperature on microstructure, electrical properties and mechanical properties of SiC/ZrB₂ ceramics was investigated. Electrical resistivity exhibits twice significant decreases with increasing sintering temperature. The first decrease from 1900?°C to 2000?°C is attributed to the obvious decrease of continuous pore channels in as-sintered materials. The second decrease from 2100?°C to 2200?°C results from the improvement of carbon crystallization and the disappearance of amorphous layers enveloping ZrB₂ grains. Additionally, the increase of sintered density with increasing temperature caused greatly advance of flexural strength, elastic modulus and Vickers hardness. But excessive temperature is detrimental to flexural strength because of SiC grain growth.     

Phase,microstructure and sintering of aluminum nitride powder by the carbothermal reduction-nitridation process with Y2O3 addition

Aluminum nitride powders were synthesized by carbothermal reduction-nitridation method using Al(OH)₃, carbon black and Y₂O₃ as raw materials. The change of phase, microstructure and densification during the AlN synthesis and sintering process were investigated and the effects of Y₂O₃ was discussed. The results showed that Y₂O₃ reacted with Al₂O₃ to form yttrium aluminates of YAlO₃ (orthorhombic and hexagonal phases), Y₄Al₂O₉ and Y₃Al₅O₁₂ at the low temperature of 1350 °C. YAlO₃ could firstly be transformed into Y₂O₃ and then completely into YN when the firing temperature and holding time increased. However, YN could be oxidized into Y₂O₃ again after the carbon removal at 700 °C in the air atmosphere. There were two ways generating AlN when adding Y₂O₃ and the possible mechanism was proposed. Y₂O₃ from YN oxidation favored the densification of AlN ceramics because the liquid had better flowability and distribution in the sintering process at 1800 °C.     

A Bio‐Inspired and Biomass‐Derived Healable Photochromic Material Induced by Hierarchical Structural Design

Utilization of bionics to develop stimuli responsive polymers that can heal damage with excellent restorability is particularly attractive for a sustainable society. Herein, inspired by chameleons, a hierarchical structural design strategy is proposed and illustrated to fabricate a healable photochromic material based on a self‐healable polymeric matrix and a finely dispersed photochromic spirooxazine. The self‐healable polymeric matrix is fabricated via the integration of multiple hydrogen bonds (H bonds) and covalent cross‐links into a biomass‐derived elastomer. The dynamic nature and soft characteristics enable the as‐prepared elastomer superior extensibility as well as self‐healing ability, while the covalent cross‐links can assist the reassociation of ruptured H bonds. The representative elastomer exhibits an extensibility of 2600% and toughness of 42.76 MJ m^?3. Furthermore, it shows good self‐healing ability with complete recovery of scratch as well as restoration against 1900% of elongation and 24.1 MJ m^?3 of toughness after healing at 60 °C for 24 h. This combination of moderate toughness, good self‐healing ability, and smart photochromic property in biomass‐derived materials should largely improve their applicability, reliability, and sustainability in various materials and devices.     

Hot corrosion studies of a salt-coated Ni-based superalloy under flowing wet air and sulfur vapor ambient

Corrosion of a salt-coated Ni-superalloy has been studied at 900°C under a wet air and sulfur vapor ambient. The corrosion thickness, after an incubation of ~60 hr, linearly increases with the corrosion time t and the onset of surface spallation occurred at t ≈ 60 hr. The corroded layer consists of a corrosion front dominated by Cr₃S₄ scales and linear precipitate structures, an inner corrosion layer dominated by Ni₃S₂ and NiO, and an outer corrosion layer dominated by Al₂O₃ networks surrounding the Ni₃S₂ and/or NiO scale structures. The corrosion mechanism is discussed based on the coexistence of H₂O, sulfur, and oxygen.